Security fencing: palisade, mesh and temporary fencing
We supply and install welded mesh, 358, palisade, vertical bar and temporary security fencing for industrial sites, utilities, schools and construction sites across Hertfordshire, Bedfordshire, Buckinghamshire and London. Gates in the fence line are made in our own workshop, and we automate them and integrate the access control as part of the same project.
Constructionline Gold and SSIP assessed, which matters when fencing is installed on a live site.
Security fencing systems we install
Welded mesh fencing
Rigid mesh panels on steel posts. The standard commercial perimeter: clear sight lines, difficult to cut quietly and an appropriate appearance for business sites.
358 mesh fencing
Mesh with apertures too small for a finger or a standard tool, specified where climbing and cutting are the main risks.
Palisade fencing
Steel pales with pointed or rounded tops. Long established on utilities, substations and industrial boundaries.
Vertical bar fencing
Bar fencing for perimeters that need to look presentable as well as secure, where mesh panels would be unsuitable.
Temporary fencing and site hoarding
Perimeters for construction and phased works, where the fence line needs to move as the site develops.
Mesh, palisade and screens



Where security fencing is specified
- Industrial and distribution. Long perimeters with vehicle gates, separating the yard from the public road.
- Utilities and infrastructure. Substations, pumping stations, compounds and plant, where the fence is often the only security on site.
- Schools and education. School fencing for perimeters and internal lines, with controlled pedestrian gates. Public sector and local authority.
- Construction sites. Hoarding and temporary fencing, reconfigured as the works progress.
- Yards and depots. Where the fence, the vehicle gate and the access control must work as one entrance.
What a fencing specification needs to settle
The right fence depends on more than the panel type. These are the factors that determine the job, and we work through each of them with you:
Height and topping
What the fence needs to keep out, and whether anything is fitted on top.
Aperture
Whether the mesh must resist fingers and hand tools, which is the case for 358 over standard mesh.
Post fixing and ground conditions
Concreted, bolted down or driven, depending on what the ground will take.
Gates in the line
Pedestrian and vehicle gates, their opening direction, and whether they will be powered.
Wind load and exposure
Particularly on hoarding and solid infill.
Working on a live site
Access, phasing, and how the perimeter remains secure while it is replaced.
Where a specification calls up a published standard or a rated product, we work to it and provide the documentation. We make no claim about a rating a product has not been tested to.
The perimeter is only as secure as the entrance
A 358 mesh perimeter offers little protection if the gate can be pushed open. We make and install the vehicle and pedestrian gates in the fence line, automate them where the site requires it, and connect the access control to the same system.
Gates and frames made in our own workshop
Made-to-measure gates, frames and infill panels in a fence line are fabricated in our own facility in Berkhamsted. Our factory production control for load bearing and welded structural steel is certified to BS EN 1090-1 and BS EN 1090-2 at execution class EXC2, certificate 2273-CPR-4271, valid to 21 August 2027.
Procurement. We hold Constructionline Gold, registration 00322439, assessed against the Common Assessment Standard, and SSIP via Once For All. We carry 8m pounds public liability and 8m pounds products liability. On framework and main contractor work this is usually the first documentation requested, and we can send it on request.
Fencing secures a site. Railings mark a boundary.
For a boundary in front of a house, a front garden or an estate frontage, railings are usually the right choice rather than security fencing, and we make those too.
Fence line, gates and access control
Priced, made and installed as one project, with one company accountable for the entrance.
Common questions
What is 358 mesh, and when is it specified?
358 mesh is a welded mesh with a very small aperture, named after that aperture rather than the panel: 3 inches by 0.5 inches, in 8 gauge wire. The apertures are too small for a finger or a standard hand tool, so the panel is hard to climb and hard to cut quickly. It is specified where the assessed risk is climbing or cutting rather than simply walking round the fence, which is why it is common on utilities, secure compounds and some school perimeters.
Do you install fencing on live sites without closing them?
Yes, and it is most of our fencing work. Few sites can stop trading, teaching or operating while the fence line is replaced, so access, phasing and security during the work are agreed in the specification. We replace the line in sections, and where a stretch has to stand open, temporary fencing or hoarding holds the boundary until the permanent panels are installed. We provide risk assessments and method statements before work starts, our engineers and core workforce are directly employed, and we are Constructionline Gold and SSIP assessed. We agree the phasing with you before work begins.
Related services
Automated gates
Vehicle and pedestrian gates in the fence line, made and automated.
Automated gatesGate access control
Intercoms, keypads, fobs and readers at the entrance.
Gate access controlServicing and repairs
Planned maintenance and call-outs on any make.
Servicing and repairsWhere we install security fencing
Fencing and enclosures we have built








